The XC3S50A-5TQG144C is a versatile field-programmable gate array (FPGA) from the Spartan-3A family, manufactured by AMD/Xilinx. This FPGA is designed to tackle the design challenges in high-volume, cost-sensitive, and I/O-intensive electronic applications.

Features and Benefits

1. Density and Performance

- The Spartan-3A family offers a wide range of densities, from 50,000 to 1.4 million system gates.

- The XC3S50A-5TQG144C model provides a flexible and cost-effective solution, with 50,000 system gates.

- Powered by proven 90nm process technology, this FPGA delivers more functionality and bandwidth per dollar compared to previous Spartan-3E and Spartan-3 FPGA families.

2. Improved System Performance

- The Spartan-3A family introduces new features that enhance system performance and reduce the cost of configuration.

- These enhancements, combined with the mature 90nm process, enable the XC3S50A-5TQG144C to set a new standard in the programmable logic industry.

3. Versatility and Flexibility

- The Spartan-3A FPGAs, including the XC3S50A-5TQG144C, are well-suited for a wide range of consumer electronics applications, such as broadband access, home networking, display/projection, and digital television equipment.

- As an FPGA, the XC3S50A-5TQG144C offers the advantage of field design upgrades, avoiding the high initial cost, lengthy development cycles, and inherent inflexibility of conventional application-specific integrated circuits (ASICs).

In conclusion, the XC3S50A-5TQG144C FPGA from the Spartan-3A family, manufactured by AMD/Xilinx, provides a cost-effective, high-performance, and versatile solution for a wide range of consumer electronics applications. Its advanced features and capabilities make it a superior alternative to mask-programmed ASICs.

key_features

The XC3S50A-5TQG144C is a low-cost, high-performance FPGA solution from AMD/Xilinx, designed for cost-conscious, high-volume applications. This versatile FPGA offers a range of advanced features and capabilities that make it an ideal choice for a variety of applications.

Product Features

1. Dual-range VCCAUX Supply

- Simplifies 3.3V-only design implementation, reducing system complexity.

- Supports a wide range of I/O standards, including LVCMOS, LVTTL, HSTL, and SSTL.

- Provides seamless integration with a variety of system components.

2. Power Management

- Suspend and Hibernate modes reduce system power consumption, optimizing energy efficiency.

- Supports advanced power management features for enhanced battery life in mobile or portable applications.

3. I/O Flexibility

- Supports up to 502 I/O pins or 227 differential signal pairs, offering ample connectivity options.

- Provides multi-voltage and multi-standard SelectIO™ interface pins, enabling compatibility with a wide range of system components.

- Offers selectable output drive up to 24 mA per pin, ensuring reliable signal transmission.

- Integrates QUIETIO standard to reduce I/O switching noise, improving signal integrity.

4. High-Speed Data Transfer

- Delivers data transfer rates up to 640 Mb/s per differential I/O, enabling fast and efficient data communication.

- Supports LVDS, RSDS, mini-LVDS, HSTL, and SSTL differential I/O with integrated differential termination resistors.

- Provides enhanced Double Data Rate (DDR) support, including DDR/DDR2 SDRAM up to 400 Mb/s.

5. Abundant Logic Resources

- Offers densities up to 25,344 logic cells, including optional shift register or distributed RAM support.

- Includes efficient wide multiplexers, wide logic, and fast look-ahead carry logic for optimized performance.

- Integrates enhanced 18 x 18 multipliers with optional pipeline for advanced signal processing capabilities.

6. Flexible Memory Architecture

- Provides up to 576 Kbits of fast block RAM with byte write enables for processor applications.

- Includes up to 176 Kbits of efficient distributed RAM for versatile memory implementation.

7. Advanced Clocking and Configuration

- Incorporates up to eight Digital Clock Managers (DCMs) for clock skew elimination, frequency synthesis, multiplication, division, and high-resolution phase shifting.

- Offers eight low-skew global clock networks and eight additional clocks per half device for reliable and flexible clocking.

- Supports a variety of configuration interfaces, including industry-standard PROMs, low-cost SPI serial Flash PROM, and x8 or x8/x16 BPI parallel NOR Flash PROM.

- Integrates a unique Device DNA identifier for design authentication and the ability to load multiple bitstreams under FPGA control.

The XC3S50A-5TQG144C from AMD/Xilinx is a versatile and cost-effective FPGA solution that delivers high performance, power efficiency, and design flexibility for a wide range of applications. Its comprehensive feature set and compatibility with industry standards make it an attractive choice for engineers and designers seeking a reliable and scalable FPGA solution.

XC3S50A-5TQG144C are New and Original in Stock, Find XC3S50A-5TQG144C electronics components stock, Datasheet, Inventory and Price at Ariat-Tech.com Online, Order XC3S50A-5TQG144C AMD with warrantied and confidence from Ariat Technology Limitd. Ship via DHL/FedEx/UPS. Payment with Wire Transfer or PayPal is OK.
Email us: Info@Ariat-Tech.com or RFQ XC3S50A-5TQG144C Online.